Stone Tile Cleaning & Restoration Poole

Over time Limestone tiles will loose the initial surface. The dullness is caused by small scratching on the surface of the stone where it was walked over. The best way to restore the finish is by polishing the Limestone. We use diamond polishing to grind, hone and polish a Limestone floor and repair the shine.

The majority of Limestone tile surfaces are uneven as the tiles are not put down flat. The only way to make a Limestone floor perfectly flat is by grinding away the lippage and irregular tile edges. This really is an involved process nevertheless the results are gorgeous. The Limestone floor will get the appearance of being just one slab of Limestone.

After grinding, the grout sits is level with the Limestone tiles. A smooth Limestone surface is much simpler to maintain. Also, soil does not get stuck into the grout lines. Limestone floor restoration typically features a few crack and chip repairs, using Limestone resin fillers. We can advise the appropriate restoration service.

Find out moreabout our Limestone cleaning Poole service in addition to our wide-ranging stone floor cleaning restoration services or Book your free Quote

Slate is a remarkably flexible material which can be protected with a range of finishes including rough texture, smooth honed or polished finish. Our company is mostly called to restore slate when it suffers form layers of old coating with ingrained dirt, so that the appearance looks dull and soiled.

We have specialist equipment and chemical treatments to remove the soil and old sealers, restoring the original slate finish. Once the professional cleaning is finished,we then apply a lasting sealer to make your floor more straightforward to mop.

If you like a smooth finish, we are able to grind the floor, but we need to measure the slate before grinding.

Learn more about our Slate cleaning and sealing Poole service plus our extensive stone cleaning  work or Book a Quote

Many Victorian and Edwardian hallways could have floors produced from Geometric Encaustic tiles.

The principal qualities of Victorian tiles are the natural clay colours and a matt finish.

Because of their age, these floors have had plenty of wear and can have layers of different sealers.

The primary concerns with victorian floor tiles is to remove the of polished, oils, dirt, waxes and grime without doing damage to the tiles.

A colour intensifying sealer is used after cleaning, to restore the first colours when you look at the tiles. The mat finish may be polished through the use of a wax or topical sealer.

Find out moreabout our Victorian Minton Tiles cleaning and sealing Poole services including our comprehensive professional cleaningoptions or Book a Quote

Porcelain is starting to become an extremely popular option to traditional ceramic tiles and natural stone.

Porcelain is extremely moisture-resistant, hence spills cannot pnetrate into the tile and cause stains.

There are inferior porcelains that may absorb soil and spills just like natural stone floors. The microscopic surface pits insure that it is hard to remove this soil.

We can get rid of ingrained soil with equipment made to go into the microscopic pits where the soil is held.

After your porcelain floor is clean we are able to use a sealer to protect against regular soil and spills.

Solid colour Porcelain Tiles can be ground and polished, the same as Granite or Stone.

Discover more about our Porcelain Tiles Cleaning Poole floor restoration service and also our substantial professional cleaning treatments or Book a Quote.

There in many cases are elements of natural stone restoration during natural stone tile cleaning. Natural stone tile restoration usually takes many techniques. All stone and tile floors suffer from wear and surface damage. The most typical problem we come across during stone restoration is oily dirt trodden to the surface producing a lifeless, ugly finish. Polished floors like Stone, Granite and Terrazzo reveal wear sooner as the polished finish goes dull from traffic scratches. Porous stone and tile that is sealed using a surface sealer will eventually suffer scratch damage.

Most stone and tile floors have cementatious grout lines. Cementatious grout is generally softer than stone and more at risk of abrasion and chemical based wear and tear. Many floors also frequently need to have crack, chip or hole repair.

We take away etching and scratching by resurfacing.You can get rid of the old finish from the natural stone, exposing a new clean surface.