Find Stone and Tile Cleaning Company in Barnet

In time, Limestone will end up matt and loose its surface. The dull appearance is brought on by microscopic marks on the surface of the Limestone where it was walked on. Before long, your Limestone will need to be polished. We operate specialized machines and industrial diamond tooling to polish the Limestone.

If your floor has been installed leaving not level tiles, this can be referred to as lippage. A Limestone floor is smoothed by grinding away the lippage and uneven tile edges. Limestone floor grinding is an expert process, that provides outstanding results. The floor will look like a single slab of stone.

After grinding, the grout sits will sit at the same level as the Limestone. After grinding Limestone maintenance is a breeze, because the mop slides over the floor. Also, soil does not get stuck into the grout lines. Cracks, chips and hole repairs are often part of the Limestone restoration process. The restoration needed will be determined by the current condition of the Limestone floor.

Find outabout our Limestone cleaning Barnet service as well as our extensive stone floor cleaning restoration options or Book your free Quote

Slate flooring is amongst the most well known forms of natural stone, given that it needs less maintenance and cleaning. We are mostly called to clean slate when it has layers of old sealer with embedded soil, and so the surface appears dull and dirty.

We now have specialist machines and chemical treatments to get rid of the soil and old coatings, restoring the original slate finish. After professional cleaning we apply hard-wearing sealers.

Some slate floors could be ground to a smooth finish.

Find out more about our Slate cleaning and sealing Barnet work plus our wide-ranging stone cleaning  systems or Book a Quote

Period Geometric or Encaustic floor tiles are found in Victorian and Edwardian hallways.

Victorian tiles are manufactured from natural clay with a natural matt finish.

A large number of these floors have been sealed and then covered with carpet or lino.

Owing to their age, these kinds of floors can have a range of covering residues, that need specialist cleaning

A colour intensifying sealer is put on immediately after cleaning, to replace the initial colours into the tiles. A topical sealer or wax finish will give the floor tiles with a high-sheen finish.

Read moreabout our Victorian Minton Tiles cleaning and sealing Barnet work plus our comprehensive professional cleaningsolutions or Book a Quote

Porcelain is categorised as a ceramic, but manufactured with alternative ingredients than conventional ceramic tiles.

This helps make Porcelain more stain resistant and simpler to maintain than traditional ceramic tiles.

If Porcelain is not properly manufactured, the surface can be absorbent similar to natural stone floors. If you have an inferior Porcelain, surface soil could be difficult to remove.

We can get rid of ingrained soil using equipment built to go into the microscopic pits where the soil is held.

After cleaning, we use specific Porcelain sealers to stop this problem.

In the event that porcelain is a through-colour, we are able to resurface the porcelain, the same as granite or Stone restoration.

Get more information about our Porcelain Tiles Cleaning Barnet floor restoration services plus our entire professional cleaning services or Book a Quote.

There are often elements of natural stone restoration when undertaking natural stone cleaning. natural stone floor restoration is generally an involved process. At the least, all stone floors suffer some type of basic damage. In most cases, dirt, spots and foot traffic scratches spoil floor's finish, consequently the need for stone restoration. Highly polished Stone tiles and granite floors show deterioration rapidly, as little foot traffic scuff marks in the surface change the shine and hold soil. Traffic problems sooner or later has an effect on porous natural stone which include Travertine, Limestone, Sandstone and Terracotta, which are most often coated with a film-forming surface sealer.

Nearly all stone and tile floors have cementatious grout lines. Dirty grout is a very common problem to be fixed on natural stone and tile floors. Cracks, chips and hole repairs are frequently part of the restoration work.

We use grinding and honing to eliminate stone finish damage due to etch marks and scratches. Natural stone can be ground to show a fresh surface.