Find Stone and Tile Cleaning Company in Kensington & Chelsea

An initial surface on a Limestone floor will steadily dull. The dull appearance is caused by minute marks on the surface where it has been walked over. The best way to bring back the original appearance is through polishing the Limestone. We use diamond polishing machinery to bring back the original sparkle.

Nearly all Limestone surfaces are not even due to the fact Limestone tiles are not installed flat. A Limestone tile floor should be smoothed by grinding away the lippage and uneven tile edges. This is an involved process but the results are breathtaking. The floor will look like an individual area of Limestone.

After grinding, the Limestone tiles be flush with the grout lines. Mopping a ground, honed and polished Limestone floor is a lot like cleaning an individual piece of glass. Also, soil doesn't get stuck within the grout lines. Hole cracks and chip repairs in many cases are an element of the restoration procedure. We can advise the correct restoration service.

Find outabout our Limestone cleaning Kensington & Chelsea work as well as our entire stone floor cleaning restoration work or Book your free Quote

Slate is an incredibly flexible flooring that may be protected using many different finishes from rough texture, smooth honed or polished appearance. Riven slate can get an accumulation of dirt in the crevices that is difficult to remove.

We use a combination of machine scrubbing and hand scrubbing to eliminate all traces of older dirty sealers and clean the slate. After our professional cleaning is completed , we leave the floor to dry, then put on a durable, easy to maintain sealer.

If you like a smooth floor, we are able to grind the ground, subject towards the slate being suited to grinding.

Discover more about our Slate cleaning and sealing Kensington & Chelsea work in addition to our entire stone cleaning  services or Book a Quote

Victorian Clay or Minton geometric tiles are installed in Victorian and Edwardian Hallways.

The principal features of Victorian tiles include natural clay colours and a matt finish.

Owing to their age, these floors have had lots of wear and can have layers of different sealers.

The main concerns with victorian floor tiles is removing several of oils, polishes, waxes, dirt and grime whilst not doing damage to the floor.

Following cleaning, a colour intensifying sealer is applied to regenerate the oroginal colours in the floor. A topical sealer or wax finish will provide the floor tiles with a high-sheen finish.

Read moreabout our Victorian Minton Tiles cleaning and sealing Kensington & Chelsea service and also our substantial professional cleaningoptions or Book a Quote

Porcelain is a kind of ceramic tile.

This makes Porcelain much more stain resistant and simpler to keep up than traditional ceramic tiles.

Some inferior porcelain has surface pores that may absorb soil just like natural stone floors. The minute surface pits insure that it is tough to remove this soil.

We know how to get rid of embedded soil with equipment built to get into the microscopic pits where the soil is held.

After cleaning, we apply specific Porcelain sealers to avoid this problem.

Solid color Porcelain could be ground and restored just like Granite or Stone.

Find out about our Porcelain Tiles Cleaning Kensington & Chelsea floor restoration work including our entire professional cleaning systems or Book a Quote.

There in many cases are elements of natural stone restoration during natural stone tile cleaning. Natural stone floor restoration may take many forms. All stone and tile floors suffer with surface damage and general wear problems. The most frequent issue we confront during stone restoration is fatty soil scuffed to the surface establishing a unexciting, unappealing coating. Highly polished floors like granite, Stone and terrazzo reveal wear more rapidly because the high shine goes dull from foot traffic marks. Permeable tile and stone sealed using a film-forming surface sealer will eventually suffer from scratch damage.

Grout is often the most sensitive section of a stone or tile installation. Grout is generally softer compared to stone and much more vulnerable to abrasion and chemical based deterioration. Cracks, chips and hole repairs are commonly an element of the restoration process.

Grinding and honing takes away surface damage from etching and surface marks.We're able to get rid of the existing finish from the natural stone, uncovering a new sparkling appearance.