Complete Stone Tile Care Across Richmond upon Thames!

As time passes, Limestone will become dull and loose its finish. The dullness is caused by small scratches on the surface of the tile where it has been walked over. The only way to revive the initial appearance is by polishing the Limestone. We use industrial diamonds to remove the dmaage and marks and recover the gloss.

If your floor has been laid with uneven tiles, this might be described as lippage. The only method to make a Limestone floor perfectly smooth is by grinding off the lippage and jagged tile edges. This is an involved process however the the finished results are fabulous. The Limestone floor will have a monolithic appearance as just one piece of Limestone.

After grinding, the Limestone tiles will sit at the same level the grout lines. After grinding and polishing Limestone maintenance is a piece of cake, because the mop slides over the floor. There will be no grout lines to capture dirt. Chips and cracks can be filled with colour matched resin repair fillers. After checking the Limestone, we will advise the best Limestone restoration program.

Get more informationabout our Limestone cleaning Richmond upon Thames work in addition to our wide-ranging stone floor cleaning restoration systems or Book your free Quote

Slate is a really popular floor and wall tile due to its low porosity and the numerous varieties and textures of Slate available. Even though slate has a low porosity, it's going to still partially absorb and oil based spills, making aggravating marks.

We use rotary scrubbing devices and sealer removers clean the slate. Then we put on hard wearing sealers.

If you have the right slate, it could be ground smooth, which makes it easier to clean.

Get more information about our Slate cleaning and sealing Richmond upon Thames services including our extensive stone cleaning  solutions or Book a Quote

Victoran clay geometric floor tiles are installed in Victorian and Edwardian Hallways.

The principal attributes of Victorian tiles include natural clay colours and a matt finish.

Quite a lot of these floors were initially sealed and then covered with carpet and lino.

The key challenges with victorian floor tiles is to remove decades of oils, polishes, waxes, dirt and grime without damaging the floor.

After cleaning an impregnating sealer is put on to enhance the colours and protect the floor. A topical sealer or wax finish will give the floor tiles with a low-sheen finish.

Get more informationabout our Victorian Minton Tiles cleaning and sealing Richmond upon Thames work along with our comprehensive professional cleaningservices or Book a Quote

Porcelain is classified as a ceramic, but made with different ingredients to traditional ceramic tiles.

The added minerals helps to make Porcelain tougher than standard ceramic tiles.

If Porcelain isn't produced properly, the top can absorb soil similar to natural stone floors. If you have a substandard Porcelain, the surface soil may be difficult to remove.

We can get rid of embedded soil using equipment made to get into the microscopic pits holding the soil.

After cleaning, we apply specialist Porcelain sealers to stop this problem.

If you've got a solid colour Porcelain, we could re-surface the tiles by Grinding and re-polishing.

Get more information about our Porcelain Tiles Cleaning Richmond upon Thames floor restoration work and our extensive professional cleaning work or Book a Quote.

Natural stone floor cleaning normally will require extra restoration services. Each type of natural stone has its own advantages and restoration difficulties. All natural stone floors suffer with surface damage and general wear challenges. In many cases, soil, stains and foot traffic scrapes affect floor's finish, hence the importance of stone restoration. A polished stone floor shows wear a lot faster because traffic abrasion that will quickly scratch he finish and dull the shine. A surface sealer does not stop porous tiles like Sandstone, Limestone and Terracotta gradually struggling with wear and spill damage.

Grout is generally the most sensitive section of a stone floor installation. Grout is usually a little bit recessed, that means the grout captures more grime compared to the natural stone itself. Holes can be filled and cracks repaired as part of a restoration.

We get rid of etching and scratches by resurfacing. Natural stone can be ground to reveal a brand new surface.