Stone Tile Cleaning & Restoration Menstrie

In the long run, Limestone will end up dull and loose its surface. The surface damage is caused by traffic scores and surface etching Limestone Polishing is the only way to revive the shine. We utilise industrial-grade equipment and diamond tooling to grind, hone and polish the Limestone.

If your floor happens to be laid with not level tiles, this is certainly known as lippage. A Limestone floor is leveled by grinding away the lippage and jagged tile edges. Limestone tile grinding is a specialist procedure, giving stunning results. The Limestone floor will get the look of appearing as just one piece of stone.

Following grinding, the grout sits will be level with the Limestone. After grinding honing and polishing cleaning is very simple, as the mop slides on the floor. Also, soil does not get stuck in the grout lines. If your Limestone has cracks and chips, we are able to repair them with resin fillers, colour matched to the Limestone. The type of restoration needed will be dependant on the current condition of the Limestone floor.

Find outabout our Limestone cleaning Menstrie work as well as our comprehensive stone floor cleaning restoration systems or Book your free Quote

Slate is an extremely popular floor and wall tile because of its low porosity and the many varieties and textures of Slate available. Although slate has a minimal porosity, it will probably still to some extent absorb and oil based spills, causing aggravating spots.

We now have specialist machines and chemical treatments to remove the soil and old coatings, restoring the original slate finish. After our professional cleaning is finished , the floor is left to dry, then use a lasting, easy to maintain sealer.

If you like a smooth finish, we can grind the slate, but we have to measure the slate before grinding.

Find out more about our Slate cleaning and sealing Menstrie service as well as our entire stone cleaning  treatments or Book a Quote

Many Victorian and Edwardian hallways could have floors made from Geometric Encaustic tiles.

Victorian tiles are manufactured from natural clay and have a normal non-shiny finish.

Along with the changes in home decor, many of these floors have carpet underlay, lino adhesive, bitumen and other adhesive deposits.

Cleaning these floors could be challenging due to the variety of old sealers and covering residues.

After cleaning, the original colours of the floor tiles can look washed out, therefore we apply a colour intensifying sealer to revive the initial depth of colour. Topical sealers and waxes will give a floor a sheen or glossy finish.

Get more informationabout our Victorian Minton Tiles cleaning and sealing Menstrie services as well as our entire professional cleaningwork or Book a Quote

Porcelain is a type of ceramic tile.

This helps make Porcelain a lot more resistant to stains and simpler to keep up than traditional ceramic tiles.

If the blend of ingredients isn't right, the top of tiles could be porous. similar to natural stone floors. This soil could be tough to remove.

We are able to remove ingrained soil with equipment built to go into the microscopic pits holding the soil.

We can help stop the dirt using Porcelain sealers.

If you have a trough-colour Porcelain, we are able to re-surface the tiles by Grinding and re-polishing.

Find out about our Porcelain Tiles Cleaning Menstrie floor restoration work in addition to our comprehensive professional cleaning systems or Book a Quote.

Natural tone floor tile cleaning is almost never cleaning alone, there is commonly additional restoration required. Each type of natural stone possesses its own characteristics and restoration challenges. At the minimum, all stone floors bear some kind of general wear and tear. The most common challenge we confront during stone restoration is oily dust trodden to the surface producing a flat, unattractive appearance. Polished Stone and granite floors exhibit deterioration fairly quickly, as little foot traffic scuff marks in the stone surface change the luster and capture soil. A surface sealer will not stop porous tiles like Limestone, Sandstone and Terracotta gradually struggling with wear and spill damage.

Grout is generally probably the most sensitive part of a natural stone installation. Grout is softer compared to stone and much more vulnerable to abrasive and chemical based damage. Stone restoration typically includes some crack and hole repairs.

Acid etching and scratches may be taken away by grinding and honing.Natural stone has got the appeal that a dirty, porous finish can be removed, uncovering a beautiful new surface.