Find Stone and Tile Cleaning Company in Stirling

In the long run, Limestone will be worn and loose its polish. The surface damage is caused by foot traffic scratching and etch marks Sooner or later, the floor will need to be repolished. Diamonds are used to eliminate the surface damage and rebuild the surface.

Almost all Limestone floors are uneven due to the fact Limestone tiles are not set level. We can grind away the jagged edges of the tiles, making the floor surface smooth. Limestone grinding is a professional service, giving brilliant results. The floor will look like just one area of stone.

Following grinding, the tiles and the grout are at the same level. Cleaning a ground, honed and polished Limestone floor is similar to cleaning a single bit of glass. There will be no uneven grout deressions to hold soil. Holes, chips and crack repairs tend to be an element of the Limestone restoration service. After assessing the Limestone, we will advise the very best Limestone restoration service.

Get more informationabout our Limestone cleaning Stirling service plus our substantial stone floor cleaning restoration systems or Book your free Quote

Slate is a wonderfully adaptable stone which can be finished using many different finishes including rough texture, smooth honed or polished polish. Riven slate can get an accumulation of soil in the crevices this is certainly difficult to get rid of.

We use a mix of machine scrubbing and hand scrubbing to eliminate all traces of old soiled sealers and clean the floor. Once the professional cleaning is finished , we leave the floor to dry, then put on a lasting, easy to clean sealer.

If you want a smooth finish, we could grind the tiles, but we have to gauge the slate before grinding.

Find out about our Slate cleaning and sealing Stirling services and our entire stone cleaning  systems or Book a Quote

Minton geometric floor tiles are mainly found in Victorian and Edwardian Hallways.

The main properties of Victorian tiles include natural clay colours and a matt finish.

Quite a lot of these floors were initially sealed and then covered with carpet or lino.

Old paint spills, waxes, polishes and sealer residues tends to make cleaning many of these floors tricky.

After cleaning, the initial colours in the floor can appear washed-out, so we put on a colour intensifying sealer to replace the original . The mat finish may be polished through the use of a wax or topical sealer.

Discover moreabout our Victorian Minton Tiles cleaning and sealing Stirling services plus our wide-ranging professional cleaningsolutions or Book a Quote

Porcelain is classified as a ceramic, but created with alternative materials to traditional glazed tiles.

This helps make Porcelain a lot more stain resistant and easier to keep up than traditional ceramic tiles.

If Porcelain is not made correctly, the surface can absorb soil similar to natural stone floors. It may be tough to remove this soil.

We know how to get rid of ingrained soil using equipment designed to enter into the microscopic pits where the soil is held.

Our Porcelain sealers can help stop further soil problems.

If you have got a trough-colour Porcelain, we are able to re-surface the tiles by Grinding and re-polishing.

Learn more about our Porcelain Tiles Cleaning Stirling floor restoration services plus our substantial professional cleaning work or Book a Quote.

There in many cases are elements of natural stone restoration in natural stone cleaning. Restoring stone and tile floors commonly involves several procedures. natural stone and tile floors suffer with foot traffic wear and damage, because people move on them. The most frequent issue we see during stone restoration is greasy soil trodden to the floor establishing a dull, ugly surface. Highly polished Stone and granite floors exhibit deterioration rapidly, as little foot traffic scratching in the stone finish change the sparkle and trap dirt. Traffic problems eventually has an effect on porous stones such as Travertine, Terracotta, Sandstone and Limestone, which are most often coated with a surface sealer.

Most stone and tile floors have cement grout. Grout is usually a little deep-set, which means that the grout captures more dirt than the natural stone itself. Cracks, chips and hole repairs are often a part of the restoration process.

We use grinding and honing to remove surface damage caused by etch marks and scratches.You can take away the old finish from the natural stone, revealing a new clean surface.