Stone Tile Cleaning & Restoration Bilsdean

Limestone ultimately looses the original polish. Surface scratches and etch marks pile-up and damage the initial polish. The best way to bring back the original appearance is by polishing the floor. We use industrial diamonds to remove the surface damage and repair the initial finish.

It's practically unachievable to lay a Limestone floor perfectly flat. The only way to make a Limestone tile floor perfectly flat is by grinding off the lippage and jagged tile edges. Grinding Limestone floors should only be performed by professionals. The Limestone floor will get a monolithic appearance as an individual slab of Limestone.

After grinding, the Limestone will sit at the same level the grout. Maintaining a ground, honed and polished Limestone floor is like cleaning a single slab of glass. Also, soil doesn't get stuck within the grout lines. If your Limestone has chips or cracks, we could repair them with resin fillers, colour matched with the Limestone. Once we inspect your Limestone floor, we will suggest on the best Limestone restoration procedure.

Learn moreabout our Limestone cleaning Bilsdean service along with our substantial stone floor cleaning restoration options or Book your free Quote

Slate floors look fantastic making use of their textured appearance and vibrant colours. We are commonly called to restore slate when it has layers of old coating with ingrained dirt, so that the finish looks dull and soiled.

There are industrial-grade sealer removers and rotary scrubbing devices to remove the layers of old coatings. After the professional cleaning is completed,finally, we use a lasting sealer which also makes a floor easier to clean.

Some slate floors could be ground to a smooth finish.

Find out more about our Slate cleaning and sealing Bilsdean service along with our wide-ranging stone cleaning  options or Book a Quote

Many Victorian and Edwardian hallways may have floors made from Geometric Encaustic tiles.

The principal properties of Victorian tiles are the natural clay colours and a matt finish.

Because of how old they are, these floors have had lots of wear and can have layers of different sealers.

Cleaning these floors could be challenging because of all of the old sealers and covering residues.

After cleaning an impregnating sealer is applied to improve the colours and protect the tiles. A topical sealer or wax finish will provide the floor tiles with a low-sheen finish.

Read moreabout our Victorian Minton Tiles cleaning and sealing Bilsdean service and our extensive professional cleaningoptions or Book a Quote

Porcelain is actually a ceramic mix with additional sand and feldspar added to produce a denser tile.

The extra minerals makes Porcelain more robust than standard ceramic tiles.

There are some inferior porcelains that can absorb surface soil and spills just like natural stone floors. This soil can be tough to remove.

We possess the experience and equipment to get rid of this difficult to reach soil.

After cleaning, we apply specific Porcelain sealers to stop this problem.

In the event that porcelain is a solid colour, we could resurface the porcelain, the same as granite or Stone restoration.

Read more about our Porcelain Tiles Cleaning Bilsdean floor restoration service in addition to our entire professional cleaning solutions or Book a Quote.

Natural stone cleaning usually calls for added restoration services. Every type of natural stone possesses its own characteristics and restoration difficulties. At the very least, all stone and tile suffer some type of generic damage. The most common challenge we see during stone restoration is greasy dirt scuffed in to the surface forming a flat, awful appearance. Polished Stone tiles and granite floors show up deterioration very easily, as small foot traffic scuff marks in the surface alter the luster and trap soil. Porous tile and stone sealed with a film-forming surface sealer will gradually suffer wear deterioration.

Most stone and tile flooring have cementatious grout lines. Being a little bit concave, which means that the grout traps more soil than the stone and tile itself. Holes could be filled and cracks repaired as an element of a restoration.

We take off acid etching and scratching by resurfacing.The good thing about natural stone is the fact that it may be resurfaced, to reveal a new fresh finish.