Stone Tile Cleaning & Restoration Dirleton

The initial polish on Limestone tiles will progressively go dull. Scratches and stains build and damage the initial appearance. Sooner or later, the tiles will need to be polished. We use diamond polishing machines to reinstate the finish.

If your floor happens to be laid leaving uneven tiles, it is referred to as lippage. The only way to make a Limestone tile floor perfectly flat is by grinding away the lippage and jagged tile edges. You should have specialized machinery and many years of Limestone grinding and polishing to successfully grind a Limestone tile floor, but the final results are magnificent. The Limestone floor will have the look of becoming an individual slab of stone.

After grinding, the grout sits at the same level as the the Limestone. It is much simpler to maintain a smooth, sleek Limestone than an irregular floor. Also, soil doesn't get stuck in the grout lines. Holes, chips and crack repairs tend to be part of the restoration work. The type of restoration needed should be dependant on the condition of of the floor.

Get more informationabout our Limestone cleaning Dirleton services including our entire stone floor cleaning restoration services or Book your free Quote

Slate floors look great making use of their distinctive finish and vibrant colours. Slate floors need regular sealing to avoid soil and spills marking the finish.

We use specialist sealer removers and scrubbing machines to get rid of the layers of old coatings. After professional cleaning we put on durable sealers.

If you prefer a smooth floor, we could grind the floor, subject to the slate being suited to grinding.

Read more about our Slate cleaning and sealing Dirleton work in addition to our substantial stone cleaning  options or Book a Quote

Many Victorian and Edwardian hallways could have floors made from Geometric Encaustic tiles.

The tiles have a matt finish and acquire their colour from the clay found in their manufacture.

Quite a lot of these floors were sealed and then covered with carpet or lino.

Cleaning these floors can be challenging owing to the range of old sealers and covering residues.

A colour intensifying sealer is used immediately after cleaning, to displace the initial colours within the tiles. The mat finish could be polished through the use of a wax or topical sealer.

Find out moreabout our Victorian Minton Tiles cleaning and sealing Dirleton work in addition to our entire professional cleaningsolutions or Book a Quote

Porcelain has started to become an progressively preferred option to ordinary ceramic tiles and natural stone.

This helps make Porcelain more stain resistant and simpler to keep up than standard ceramic tiles.

When the blend of ceramics isn't correct, the top of tiles could be porous. similar to natural stone floors. If you've got an inferior Porcelain, surface soil could be hard to remove.

We can get rid of embedded soil with equipment built to enter into the microscopic pits holding the soil.

When your porcelain floor has been cleaned we can to protect against regular soil and spills.

Solid colour Porcelain Tiles can also be ground and polished, similar to Granite or Stone.

Find out about our Porcelain Tiles Cleaning Dirleton floor restoration work as well as our substantial professional cleaning options or Book a Quote.

Natural stone cleaning very often entails further restoration services. natural stone floor restoration can be a multi-step process. At the very least, all stone floors suffer some form of basic wear and tear. The most typical challenge we meet during stone restoration is fatty dust trodden to the floor producing a flat, unpleasant coating. A polished stone floor shows wear faster since traffic abrasion that will start to scratch he finish and change the luster. Traffic damage sooner or later has an effect on porous stones such as Terracotta, Limestone, Travertine and Sandstone, which are most often protected with a film-forming surface sealer.

Grout is often the most vulnerable element of a floor installation. Grimy grout is a common problem to be fixed on natural stone and tile floors. Holes could be filled and cracks repaired as an element of the restoration.

Resurfacing removes surface damage from etch spills and surface scratching.The good thing about natural stone is that it could be re-surfaced, to show a new fresh finish.