Stone Tile Cleaning & Restoration Scoughall

Limestone eventually looses its initial appearance. The dullness is brought on by microscopic scratches on the surface of the stone where it's been walked over. Gradually, your floor will need to be repolished. We use industrial diamond polishing to re-surface the tiles and rebuild the initial polish.

If the tiles are not really, even this problem is known as "lippage". We can grind away the uneven tile edges, making the tile surface flat. You need specialist machines and many years of grinding and polishing to grind a Limestone floor, however the final results are fantastic. The Limestone will get the look of becoming an individual piece of stone.

After grinding, the grout sits at the same level as the the Limestone tiles. Cleaning a ground and polished Limestone floor is much like cleaning a single bit of glass. There will be no grout channels to capture soil. If your Limestone floor has chips and cracks, we can repair the damage using resin fillers, closely colour matched with the Limestone. After we have assessed the Limestone, we can advise the very best Limestone restoration process.

Get more informationabout our Limestone cleaning Scoughall service as well as our substantial stone floor cleaning restoration service or Book your free Quote

Slate is a really popular floor and wall tile because of its low porosity and the many varieties and textures of Slate available. While slate has a minimal porosity, it will probably always to some extent absorb and oil based spills, leaving irritating marks.

There are industrial-grade sealer removers and rotary scrubbing appliances to remove the layers of old sealer. After the professional cleaning is complete,finally we put on a lasting sealer which also makes a floor easier to mop.

If you have an appropriate slate, it can be ground smooth, rendering it better to clean.

Get more information about our Slate cleaning and sealing Scoughall work plus our substantial stone cleaning  solutions or Book a Quote

Many Victorian and Edwardian hallways will have floors produced from Geometric Encaustic tiles.

Victorian tiles are manufactured from natural clay and have a normal non-shiny finish.

A good deal of these floors were initially sealed and then covered with carpet and lino.

Owing to their age, these floors might have a variety of coating residues, that need to have expert cleaning

After cleaning, the initial colours in the floor tiles can appear washed-out, therefore we put on a colour intensifying sealer to replace the original . Topical sealers and waxes can give a floor a sheen or glossy finish.

Learn moreabout our Victorian Minton Tiles cleaning and sealing Scoughall work and our extensive professional cleaningwork or Book a Quote

Porcelain is a type of ceramic tile.

The added minerals helps make Porcelain more robust than standard ceramic tiles.

There are substandard porcelains that can absorb surface soil and spills similar to natural stone floors. It can be difficult to remove this soil.

We have the equipment and experience to remove this hard to reach soil.

We can help minimize the dirt using Porcelain sealers.

If you've got a solid colour Porcelain, we could re-surface the tiles by Grinding and re-polishing.

Read more about our Porcelain Tiles Cleaning Scoughall floor restoration service along with our extensive professional cleaning services or Book a Quote.

Natural tone floor cleaning is seldom cleaning alone, there is frequently more restoration required. Natural stone floor restoration usually takes many forms. Natural stone floors suffer with foot traffic wear and damage, because individuals wander over them. The most frequent issue we run into during stone restoration is greasy dust trodden to the surface causing a flat, unattractive finish. A polished stone floor shows wear a lot faster as traffic wear that will quickly damage he finish and change the shine. Traffic problems eventually has an effect on porous stones which include Travertine, Sandstone, Limestone & Terracotta, which are most often coated with a surface sealer.

The vast majority of stone and tile flooring have cement grout lines. Being a little deep-set, that means the grout captures more soil compared to the natural stone itself. Cracks, chips and hole repairs are often a part of the restoration work.

We use resurfacing to take away stone finish damage due to etching and scratches.The beauty of natural stone is the fact that it could be re-surfaced, to reveal a new finish.