Stone Tile Cleaning & Restoration Busby

An original finish on Limestone will gradually loose its finish. Scratching and etching pile up and take off the original finish. Gradually, your Limestone floor will need to be polished. We use industrial diamond polishing to grind, hone and polish the floor and repair the initial shine.

Most Limestone surfaces are uneven since the Limestone tiles are not put down flat. A Limestone tile floor should be smoothed by grinding off the lippage and jagged edges of the tiles. Grinding Limestone floor tiles should really only be undertaken by restoration professionals. The Limestone looks monolithic, appearing to be made from just one slab of Limestone.

After grinding, the grout sits is level with the Limestone. It is much easier to mop a smooth, sleek floor than a bumpy floor. There are no grout channels to retain soil. If your Limestone has cracks and chips, we are able to repair the damage using resin fillers, colour matched with the Limestone. After checking out the Limestone, we will advise the very best Limestone restoration program.

Discover moreabout our Limestone cleaning Busby work and our comprehensive stone floor cleaning restoration work or Book your free Quote

Slate flooring is amongst the most popular forms of natural stone, as it needs less routine maintenance and cleaning. Slate floors need regular sealing to prevent soil and spills marking the finish.

We use professional sealer removal treatments and scrubbing devices to eliminate the layers of old coatings. When our professional cleaning is complete , the floor is left to dry, then use a long-lasting, easy to clean sealer.

If you want a smooth floor, we could grind the ground, subject into the slate being suitable for grinding.

Find out about our Slate cleaning and sealing Busby work plus our entire stone cleaning  treatments or Book a Quote

Period Geometric or Encaustic floor tiles are installed in Victorian and Edwardian hallways.

Victorian tiles are produced from natural clay and have a natural matt finish.

Quite a lot of these floors were sealed and then covered up with carpet or lino.

The primary challenges with victorian floor tiles is removing years of oils, polishes, waxes, dirt and grime without damaging the floor.

After cleaning, the initial colours in the floor tiles can appear washed out, so we use a colour intensifying sealer to restore the original . The mat finish could be polished by making use of a wax or topical sealer.

Discover moreabout our Victorian Minton Tiles cleaning and sealing Busby service along with our comprehensive professional cleaningoptions or Book a Quote

Porcelain is actually a ceramic mix with additional sand and feldspar added to make a more compact tile.

Porcelain is extremely resistant to moisture, so spillages are unable to pnetrate into the tile and result in stains.

There are some inferior porcelains that may absorb soil and spills just like natural stone floors. The tiny surface pits insure that it is tough to remove this soil.

You need professional equipment and cleaners to eliminate this soil.

We will help minimize the dirt with Porcelain sealers.

If you've got a solid colour Porcelain, we are able to re-surface the tiles by Grinding and re-polishing.

Discover more about our Porcelain Tiles Cleaning Busby floor restoration services including our entire professional cleaning service or Book a Quote.

There are often aspects of natural stone restoration during natural stone cleaning. natural stone floor restoration is often a multi-step process. Natural stone floors suffer with traffic wear and damage, because individuals move over them. The most typical challenge we see during stone restoration is fatty soil scuffed in to the floor generating a lifeless, awful coating. A polished Stone or granite floor shows wear more quickly as traffic wear that will begin to damage he polish and change the gloss. Traffic problems sooner or later has an effect on porous natural stone including Sandstone, Travertine, Limestone & Terracotta, which are usually coated with a surface sealer.

Most stone and tile floors have cement grout. Being slightly concave, so the grout traps more dirt than the tile itself. Many stone floors also often need crack, chip or hole repair.

Resurfacing takes out damage from etch spills and surface scratches.Natural stone has the appeal that a soiled, permeable finish can be taken away, revealing a beautiful new surface.