Stone Tile Cleaning & Restoration Camelon

An initial appearance on Limestone tiles will gradually loose its shine. The dull appearance is caused by small scratching on the surface of the tile where it is often walked over. Sooner or later, your Limestone floor will need to be repolished. We use industrial diamond polishing to re-surface the tiles and repair the original shine.

If your floor has been installed leaving uneven tiles, this might be referred to as “lippage”. The only way to make a Limestone tile floor perfectly smooth is by grinding away the lippage and uneven tile edges. You should have specialized machinery and many years of hands on experience to grind and hone a Limestone floor, nevertheless the result is magnificent. The Limestone floor will get a monolithic appearance as just one area of stone.

Following grinding, the Limestone tiles be at the same level the grout. After grinding maintenance is a piece of cake, because the mop slides on the floor. Also, soil does not get stuck within the grout lines. Cracks and chips can be repaired with colour matched resin repair fillers. The type of restoration needed is going to be dependant on the condition of of your Limestone floor.

Find outabout our Limestone cleaning Camelon work as well as our comprehensive stone floor cleaning restoration treatments or Book your free Quote

Slate is a tremendously popular floor and wall tile due to its low porosity and the numerous textures and varieties of Slate available. Riven slate can get an accumulation of dirt and sealer residues inside the crevices this is certainly difficult to get rid of.

We have specialist equipment and chemical treatments to eliminate the soil and old coatings, reviving the original slate finish. Then we use hard wearing sealers.

If you want a smooth floor, we are able to grind a floor, subject to your slate being suitable for grinding.

Find out about our Slate cleaning and sealing Camelon work plus our entire stone cleaning  systems or Book a Quote

Victorian Clay or Minton geometric tiles are laid in Victorian and Edwardian Hallways.

The main attributes of Victorian tiles are the natural clay colours and a matt finish.

Due to how old they are, these floors have had a lot of wear and often have layers of different sealers.

The primary issues with victorian floor tiles is to remove years of oils, polishes, waxes, dirt and grime whilst not damaging the tiles.

Following cleaning, a colour intensifying sealer is put on to regenerate the natural colours in the tiles. Topical sealers and waxes will provide the floor a sheen or glossy finish.

Read moreabout our Victorian Minton Tiles cleaning and sealing Camelon work in addition to our entire professional cleaningservice or Book a Quote

Porcelain is becoming an extremely fashionable alternative to ordinary ceramic tiles and natural stone.

This makes Porcelain a lot more stain resistant and simpler to maintain than traditional ceramic tiles.

There are inferior porcelains that will absorb soil and spills similar to natural stone floors. The tiny surface pits insure that it is difficult to remove this soil.

We are able to remove embedded soil using equipment designed to enter into the microscopic pits where the soil is held.

After cleaning, we use specialist Porcelain sealers to avoid this problem.

Solid color Porcelain may be ground and restored just like Granite or Stone.

Get more information about our Porcelain Tiles Cleaning Camelon floor restoration work and also our extensive professional cleaning services or Book a Quote.

Natural tone floor tile cleaning is hardly ever cleaning alone, there is certainly regularly extra restoration required. Restoring stone and tile floors normally involves a range of steps. All natural stone floors have problems with wear and surface damage. Foot traffic damage, stains and surface problems happens on most stone floors, ruining the surface, making the floor look flat and unappealing, consequently the significance of stone restoration. Highly polished floors like granite, Stone and terrazzo reveal surface damage much faster once the lustre gets dull from foot traffic marks. Permeable tile and natural stone sealed with a surface sealer will gradually be affected by wear damage.

Virtually all stone floors have grout lines. Grimy grout is a common problem to be reconciled on natural stone and tile floors. Many floors also commonly need to have crack, chip or hole repair.

Resurfacing takes away surface damage from etch spills and surface marks.You can take away the old finish from the natural stone, disclosing a new clean finish.