Stone Tile Cleaning & Restoration High Bonnybridge

An initial appearance on a Limestone floor will eventually loose its shine. Scratching and etch damage strengthen and damage the original polish. Ultimately, the tiles will have to be polished. We use diamond polishing to re-surface the Limestone tiles and recover the original surface.

If your floor happens to be laid leaving uneven tiles, this is certainly referred to as “lippage”. The only way to make a Limestone floor flat is by grinding off the lippage and jagged tile edges. Limestone tile grinding is a professional procedure, that gives stunning results. The floor will appear like an individual area of Limestone.

Following grinding, the tiles and the grout will be at the exact same level. After grinding and polishing mopping is a piece of cake, as the mop slides on the floor. There are no depressed grout lines to retain dirt. If your Limestone has chips and cracks, we are able to repair the damage using resin fillers, closely colour matched to the Limestone. The type of restoration needed is going to be based on the current state of your Limestone floor.

Learn moreabout our Limestone cleaning High Bonnybridge work and our extensive stone floor cleaning restoration systems or Book your free Quote

Slate is an incredibly adaptable material that may be finished with many different finishes including rough surface, smooth honed or polished finish. Riven slate will get a build-up of dirt and sealer residues inside the crevices this is certainly difficult to get rid of.

We use a combination of machine scrubbing and hand scrubbing to get rid of all traces of older soiled sealers and clean the floor. Then we apply durable sealers.

If you like a smooth finish, we can grind the floor, but we have to assess the slate before grinding.

Discover more about our Slate cleaning and sealing High Bonnybridge work in addition to our extensive stone cleaning  work or Book a Quote

Victorian Clay Tiles are installed in a lot of Victorian and Edwardian hallways.

The tiles are unglazed from the natural colours from the clay used to make them.

With the changes in residential design, many of these floors come with underlay from carpet, lino adhesive, bitumen and different adhesive deposits.

Owing to their age, many of these floors may have many different covering residues, that need to have professional cleaning

After cleaning, the initial colours of the floor can appear washed-out, therefore we use a colour intensifying impregnating sealer to replace the original depth of colour. If you prefer a sheen or gloss finish a surface sealer or wax could be put on.

Find outabout our Victorian Minton Tiles cleaning and sealing High Bonnybridge work along with our wide-ranging professional cleaningwork or Book a Quote

Porcelain is classified as a ceramic, but made with different ingredients than standard glazed tiles.

High quality Porcelain has really low porosity, this means less stains, less water damage, and less need for sealing.

If Porcelain is not produced correctly, the top can absorb soil just like natural stone floors. The minute surface pits make it difficult to remove this soil.

We possess the equipment and experience to remove this difficult to reach soil.

Our Porcelain sealers can help stop further soil problems.

Solid color Porcelain can be ground and restored just like Granite or Stone.

Discover more about our Porcelain Tiles Cleaning High Bonnybridge floor restoration work in addition to our extensive professional cleaning services or Book a Quote.

Natural tone floor cleaning is seldom cleaning alone, there is certainly frequently extra restoration required. natural stone floor restoration is often a multi-step process. At the minimum, all stone and tile endure some kind of basic wear and tear. The most frequent problem we come across during stone restoration is oily grime scuffed into the surface forming a flat, unsightly surface. Polished Stone and granite floors show wear and tear very easily, as small foot traffic scuff marks in the stone surface alter the luster and hold soil. Porous natural stone and tile that is sealed using a film-forming surface sealer will eventually suffer scratch damage.

Grout is frequently the most vulnerable part of a stone or tile installation. Cement grout is generally softer compared to natural stone stone and tile and more susceptible to abrasive and chemical based wear and tear. Many natural stone floors also generally need crack, chip or hole repair.

Acid etching and scratches may be taken away by grinding and honing.Natural stone has got the advantage that a dirty, permeable finish can be removed, uncovering a lovely new surface.