Stone Tile Cleaning & Restoration Maddiston

Limestone ultimately looses the original appearance. Scratches and etch marks strengthen and damage the initial appearance. Limestone Polishing is the best way to revive the original appearance. We use industrial diamond polishing to re-surface a Limestone floor and bring back the original finish.

It really is nearly unachievable to install a Limestone floor really flat. The only way to make a Limestone floor smooth is by grinding off the lippage and irregular tile edges. You must have specialized machinery and years of hands on experience to grind and hone a Limestone floor, but the result is beautiful. The Limestone looks "monolithic", appearing to be produced from a single slab of Limestone.

After grinding, the grout sits will be level with the Limestone tiles. It is much easier to maintain a smooth floor than an uneven floor. A smooth Limestone floor doesn't have grout depessions to capture soil. Chips and cracks can be repaired with colour matched resin fillers. Once we inspect your Limestone floor, we will advice on the optimum Limestone restoration procedure.

Get more informationabout our Limestone cleaning Maddiston service including our extensive stone floor cleaning restoration systems or Book your free Quote

Slate is a wonderfully functional stone which can be sealed with a variety of finishes from rough surface, smooth honed or polished appearance. Slate needs regular sealing to prevent spills and soil marking the surface.

We use rotary scrubbing appliances and sealer removers clean the slate. After the professional cleaning is completed,finally we employ a long-lasting sealer that will make your floor better to look after.

If you like a smooth floor, we could grind the ground, subject to your slate being suited to grinding.

Learn more about our Slate cleaning and sealing Maddiston services in addition to our entire stone cleaning  treatments or Book a Quote

Victorian Clay Tiles are found in a lot of Victorian and Edwardian hallways.

The foremost properties of Victorian tiles are the natural clay colours and a matt finish.

A good number of these floors were sealed and then covered up with carpet or lino.

The key issues with victorian floor tiles is to remove years of polished, oils, dirt, waxes and grime whilst not doing damage to the floor.

A colour intensifying sealer is applied following cleaning, to restore the first colours into the tiles. Topical sealers and waxes can give the floor a sheen or glossy finish.

Discover moreabout our Victorian Minton Tiles cleaning and sealing Maddiston services along with our substantial professional cleaningservice or Book a Quote

Porcelain is categorised as a ceramic, but created with alternative ingredients to traditional glazes and clay tiles.

Porcelain is very moisture-resistant, therefore spillages are unable to soak into the tile and result in stains.

If Porcelain isn't properly produced, the top can absorb soil similar to natural stone floors. If you have a substandard Porcelain, surface soil can be difficult to remove.

We can get rid of ingrained dirt using equipment built to go into the microscopic pits where the soil is held.

After cleaning, we apply specific Porcelain sealers to stop this problem.

Solid colour Porcelain Tiles may also be ground and polished, the same as Granite or Stone.

Discover more about our Porcelain Tiles Cleaning Maddiston floor restoration service along with our extensive professional cleaning solutions or Book a Quote.

There are often aspects of natural stone restoration when natural stone tile cleaning. Natural stone tile restoration addresses a number of services. Stone floors have problems with traffic wear and damage, because people move on them. Traffic wear and tear, stains and surface problems happens on many stone floors, wrecking the appearance, making the stone look lackluster and unattractive, subsequently the need for stone restoration. Highly polished floors like granite, Stone and terrazzo show surface damage a lot quicker once the polished finish goes dull from foot traffic marks. A surface sealer does not stop porous stone and tiles like Sandstone, Limestone & Terracotta eventually suffering from wear and spill problems.

Almost all tile floors have grout lines. Soiled grout is a common problem to be reconciled on natural stone and tile floors. Many natural stone floors also generally need to have crack, chip or hole repair.

We get rid of acid etching and scratching by resurfacing.Natural stone has the advantage that a dirty, porous finish can be taken off, exposing a beautiful new surface.