Stone Tile Cleaning & Restoration Rumford

In time, Limestone will be worn and loose its appearance. This damage to the surface is caused by traffic scratches and etch marks Before long, the Limestone will need to be re-polished. We use industrial diamonds to take away the marks and scratches and recover the original finish.

Nearly all Limestone floors are not even since the tiles are not set flat. We can grind away the irregular tile edges, making a floor surface perfectly flat. Grinding Limestone really should only be carried out by specialists. The Limestone will get a monolithic appearance as just one piece of stone.

After grinding, the tiles and grout will be at exactly the same level. After grinding Limestone maintenance is very simple, because the mop slides on the floor. Also, soil does not get stuck into the grout lines. If your Limestone floor has chips or cracks, we are able to repair the damage using resin fillers, closely colour matched to the Limestone. The particular restoration needed will be based on the state of the Limestone floor.

Find out moreabout our Limestone cleaning Rumford work plus our wide-ranging stone floor cleaning restoration options or Book your free Quote

Slate flooring is among the most well known types of natural stone, given that it requires less maintenance and cleaning. Cleft slate can get a build-up of soil inside the crevices that is difficult to get rid of.

We use a mix of machine and hand scrubbing to get rid of all traces of older dirty sealers and clean the tiles. After our professional cleaning is complete,we then put on a durable sealer that also makes a floor much easier to mop.

Some slate floors can be ground to a smooth finish.

Read more about our Slate cleaning and sealing Rumford service in addition to our comprehensive stone cleaning  solutions or Book a Quote

Victorian Clay or Minton geometric tiles are installed in Victorian and Edwardian Hallways.

Victorian tiles are produced from natural clay with a normal non-shiny finish.

Along with the changes in residential decoration, these floors come with underlay from carpet, lino adhesive, bitumen and other glue residues.

The primary concerns with victorian floor tiles is to remove several of oils, polishes, waxes, dirt and grime without causing damage to the floor.

After cleaning, a colour intensifying sealer is applied to revive the natural colours in the floor. A topical sealer or wax finish can give the floor with a high-sheen finish.

Get more informationabout our Victorian Minton Tiles cleaning and sealing Rumford work in addition to our wide-ranging professional cleaningwork or Book a Quote

Porcelain is becoming an increasingly sought after option to ordinary ceramic tiles and natural stone.

The extra minerals makes Porcelain more robust than traditional ceramic tiles.

Some inferior porcelains have tiny holes that may absorb soil similar to natural stone floors. It could be tough to remove this soil.

We know how to remove embedded soil with equipment made to go into the microscopic pits holding the soil.

After cleaning, we apply specialist Porcelain sealers to stop this problem.

In the event that porcelain is a solid colour, we could resurface the porcelain, the same as granite or Stone restoration.

Find out about our Porcelain Tiles Cleaning Rumford floor restoration work in addition to our extensive professional cleaning treatments or Book a Quote.

Natural stone cleaning generally entails more restoration services. Every type of natural stone has its own advantages and restoration challenges. Stone floors suffer with traffic wear and damage, because people walk on them. In most cases, dirt, spots and traffic marks spoil the floor finish, hence the need to have stone restoration. Polished Stone and granite floors exhibit wear and tear rapidly, as little foot traffic scratching on the stone finish change the shine and hold dirt. Foot traffic problems sooner or later has an effect on porous natural stone including Travertine, Sandstone, Terracotta and Limestone, which are usually protected with a surface sealer.

Grout is usually the most vulnerable part of a floor installation. Grimy grout is a very common problem to be solved on natural stone and tile floors. Holes may be filled and cracks repaired as an element of a restoration.

Grinding and honing takes out surface damage from etch marks and surface scratches.We're able to remove the old surface from the stone, revealing a brand new sparkling finish.