Stone Tile Cleaning & Restoration Limekilns

Limestone eventually looses the original polish. This surface damage is caused by foot traffic scratches and etch marks The only way to restore the original polish is by polishing the Limestone. We use diamond polishing equipment to revive the initial shine.

Most Limestone tile floors are not even since the tiles are not set level. A Limestone tile floor is smoothed by grinding away the lippage and jagged edges of the tiles. You should have specialist machinery and years of Limestone grinding and polishing to grind a Limestone tile floor, nevertheless the results are magnificent. The Limestone will have a monolithic appearance as an individual piece of stone.

Following grinding, the tiles will be at the same level the grout lines. After grinding and polishing mopping is a breeze, as the mop slides on the floor. There are no grout channels to retain dirt. Holes, chips and crack repairs tend to be an element of the restoration service. We can recommend the correct Limestone restoration service.

Find outabout our Limestone cleaning Limekilns services along with our entire stone floor cleaning restoration systems or Book your free Quote

Slate is a remarkably versatile material which can be sealed using many different finishes including rough texture, smooth honed or polished appearance. We are commonly called to restore slate when it suffers form layers of old sealer with embedded soil, so the finish appears dull and soiled.

We use specialist sealer removers and rotary scrubbing machines to eliminate the layers of old sealer. When the professional cleaning is completed,finally we apply a long-lasting sealer which also makes a floor much easier to mop.

If you like a smooth floor, we are able to grind the ground, subject to your slate being suitable for grinding.

Learn more about our Slate cleaning and sealing Limekilns service including our comprehensive stone cleaning  treatments or Book a Quote

Victorian Clay Tiles are installed in many Victorian and Edwardian hallways.

The main attributes of Victorian tiles include natural clay colours and a matt finish.

Lots of these floors were initially sealed and then covered with carpet or lino.

Cleaning these floors can be challenging owing to the variety of old sealers and residues.

A colour intensifying sealer is used immediately after cleaning, to replace the original colours when you look at the tiles. A topical sealer or wax finish can give the floor with a sheen finish.

Learn moreabout our Victorian Minton Tiles cleaning and sealing Limekilns service as well as our extensive professional cleaningservices or Book a Quote

Porcelain is classified as a ceramic, but manufactured with alternative ingredients than conventional ceramic tiles.

This helps make Porcelain much more resistant to stains and easier to maintain than standard ceramic tiles.

Inferior porcelains have tiny holes which will absorb soil similar to natural stone floors. The microscopic surface pits insure that it is tough to remove this soil.

We have the experience and equipment to get rid of this hard to reach soil.

Our Porcelain sealers will help stop further soil problems.

Solid color Porcelain can be ground and restored like Granite or Stone.

Read more about our Porcelain Tiles Cleaning Limekilns floor restoration work in addition to our substantial professional cleaning treatments or Book a Quote.

There tend to be aspects of natural stone restoration when undertaking natural stone floor cleaning. Natural stone floor restoration usually takes many techniques. All stone and tile floors suffer from wear and surface damage. The most typical issue we see during stone restoration is fatty soil trodden into the floor causing a worn, unpleasant coating. Polished Stone and granite floors exhibit deterioration very easily, as minute traffic scratches on the stone surface alter the gloss and trap soil. Permeable stone and tile that is sealed with a film-forming surface sealer will progressively suffer from scratch deterioration.

Nearly all tile floors have cement grout lines. Cementatious grout is softer compared to natural stone stone and tile and more susceptible to abrasive and chemical deterioration. Cracks, chips and hole repairs are commonly an element of the restoration process.

We use resurfacing to eliminate stone finish damage caused by etch marks and scratch damage. Natural stone can be ground to reveal a new stone finish.