Stone Tile Cleaning & Restoration Strathkinness

The initial appearance on a Limestone floor will gradually loose its shine. Scratching and spill damage build up and damage the initial shine. The only way to revive the initial polish is by polishing the tiles. We use industrial diamonds to eliminate the damage and restore the initial appearance.

In the event that tiles are not really, perfectly even this condition is referred to as "lippage". A Limestone floor is leveled by grinding off the lippage and uneven edges of the tiles. It is a complicated process but the the finished results are fabulous. The Limestone will get a monolithic appearance as a single slab of Limestone.

After grinding, the Limestone be at the same level the grout. It is a lot easier to mop a smooth, sleek Limestone than an irregular floor. There will be no uneven grout deressions to hold soil. If your Limestone floor has chips and cracks, we could repair them with resin fillers, colour matched with the Limestone. After inspecting the Limestone floor, we can advise the best Limestone restoration service.

Get more informationabout our Limestone cleaning Strathkinness services including our entire stone floor cleaning restoration solutions or Book your free Quote

Slate floors look fantastic due to their distinctive finish and stunning colour. Cleft slate will get a build-up of dirt and sealer residues inside the crevices that is difficult to remove.

There are professional sealer removers and rotary scrubbing machines to get rid of the layers of old coatings. Once the professional cleaning is complete,we then use a lasting sealer that also makes your floor much easier to maintain.

If you have got a suitable slate, it can be ground smooth, making it much easier to clean.

Get more information about our Slate cleaning and sealing Strathkinness service along with our wide-ranging stone cleaning  service or Book a Quote

Victorian Clay Tiles are installed in a lot of Victorian and Edwardian hallways.

The tiles have a matt finish and obtain their colour through the clay found in their manufacture.

A large number of these floors have been sealed and then covered up with carpet or lino.

With their age, many of these floors may have a number of covering residues, that need to have professional cleaning

After cleaning, a colour intensifying sealer is used to revive the oroginal colours in the tiles. Topical sealers and waxes can give a floor a sheen or glossy finish.

Learn moreabout our Victorian Minton Tiles cleaning and sealing Strathkinness services and also our substantial professional cleaningsystems or Book a Quote

Porcelain is becoming an extremely preferred option to standard ceramic tiles and natural stone.

Quality Porcelain has really low porosity, this means less stains, less water damage, much less need for sealing.

Some inferior porcelain has surface pores that will absorb soil similar to natural stone floors. This soil could be tough to remove.

You need professional machinery and cleaning solutions to remove this soil.

Once your porcelain floor is clean we are able to use a sealer to protect against day to day spillages.

If you've got a solid colour Porcelain, we are able to re-surface the tiles by Grinding and re-polishing.

Learn more about our Porcelain Tiles Cleaning Strathkinness floor restoration work plus our substantial professional cleaning work or Book a Quote.

Natural tone floor tile cleaning is hardly ever cleaning alone, there is often extra restoration required. natural stone floor restoration is generally an involved process. Stone and tile floors have problems with traffic wear and damage, because individuals wander over them. The most typical issue we confront during stone restoration is fatty grime scuffed into the surface generating a worn, unpleasant surface. Highly polished floors like granite, Stone and terrazzo show wear a lot faster because the polished finish gets dull from traffic scratching. Wear damage sooner or later has an effect on porous stones including Limestone, Terracotta, Sandstone and, Travertine, which are most often protected with a film-forming surface sealer.

Most stone and tile flooring has cement grout. Grout is generally softer compared to stone and much more vulnerable to abrasion and chemical based wear and tear. Cracks, chips and hole repairs are often a part of the restoration work.

Resurfacing removes surface damage from etch spills and surface scratching.The good thing about natural stone is that it can be re-surfaced, to reveal a new finish.