Stone Tile Cleaning & Restoration Torryburn

Limestone eventually looses its initial shine. Surface scratches and stains pile up and dull the initial appearance. Limestone Polishing is the best way to revive the original shine. We use industrial diamond polishing machines to reinstate the original sparkle.

Nearly all Limestone floors are uneven since the Limestone tiles are not installed level. The only way to make a Limestone tile floor flat is by grinding away the lippage and irregular tile edges. You must have dedicated machinery and years of experience to grind, hone and polish a Limestone tile floor, but the final result is amazing. The Limestone floor looks monolithic, appearing to be manufactured from just one slab of Limestone.

After grinding, the Limestone will be at the same level the grout. An even Limestone surface is much simpler clean. A smooth surface floor doesn't have grout lines to trap dirt. If your Limestone has chips and cracks, we can repair them with resin fillers, closely colour matched to the Limestone. The restoration needed is going to be based on the condition of of the floor.

Learn moreabout our Limestone cleaning Torryburn service and also our extensive stone floor cleaning restoration service or Book your free Quote

Slate is an incredibly flexible stone which can be protected using a number of finishes from rough surface, smooth honed or polished surface. Riven slate will get an accumulation of dirt inside the crevices that is difficult to remove.

We use professional sealer removers and rotary scrubbing devices to eliminate the layers of old sealer. When the professional cleaning is complete , the floor is left to dry, then use a long-lasting, easy to maintain sealer.

If you prefer a smooth finish, we could grind the floor, but we need to measure the slate before grinding.

Get more information about our Slate cleaning and sealing Torryburn services along with our wide-ranging stone cleaning  treatments or Book a Quote

Victorian Clay Tiles are installed in many Victorian and Edwardian hallways.

The tiles have a matt finish and acquire their colour through the clay utilized in their manufacture.

Because of how old they are, these floors have had a lot of wear and can have layers of various sealers.

Owing to their age, these kinds of floors might have many different covering residues, that need to have professional cleaning

Following cleaning, a colour intensifying sealer is put on to regenerate the oroginal colours in the floor. A topical sealer or wax finish will provide the floor tiles with a low-sheen finish.

Discover moreabout our Victorian Minton Tiles cleaning and sealing Torryburn work along with our substantial professional cleaningoptions or Book a Quote

Porcelain is a form of ceramic tile.

The additional minerals helps to make Porcelain much stronger than standard ceramic tiles.

There are some inferior porcelains that will absorb soil and spills just like natural stone floors. The minute surface pits make it hard to remove this soil.

We are able to remove ingrained dirt using equipment designed to go into the microscopic pits holding the soil.

After cleaning, we use specialist Porcelain sealers to stop this problem.

Solid colour Porcelain Tiles may also be ground and polished, the same as Granite or Stone.

Read more about our Porcelain Tiles Cleaning Torryburn floor restoration services along with our wide-ranging professional cleaning service or Book a Quote.

Natural stone floor cleaning very often will incorporate further restoration services. Natural stone restoration addresses a variety of treatments. All natural stone floors suffer from surface damage and general wear issues. The most frequent issue we confront during stone restoration is oily dirt scuffed in to the floor forming a worn, ugly surface. Highly polished floors like Stone, Granite and Terrazzo reveal wear a lot quicker as the polished finish gets dull from traffic scratches. Foot traffic damage eventually has an effect on porous natural stone which include Sandstone, Terracotta, Travertine and, Limestone, which are usually protected with a surface sealer.

Virtually all natural stone floors have grout lines. Soiled grout is a common problem to be solved on natural stone and tile floors. Cracks, chips and hole repairs are often part of the restoration process.

We get rid of etching and scratching by grinding and honing.You can get rid of the existing finish from the stone, disclosing a new clean appearance.