Stone Tile Cleaning & Restoration Newbattle

Limestone ultimately looses the initial appearance. The dullness is caused by tiny marks on the surface of the stone where it is often walked on. Gradually, your Limestone will have to be repolished. We use diamond polishing to re-surface the Limestone tiles and restore the finish.

In the event that tiles are not even, even this condition is known as "lippage". The only way to make a Limestone tile floor perfectly flat is by grinding off the lippage and jagged tile edges. It is an involved process however the results are breathtaking. The Limestone looks monolithic, appearing to be manufactured from just one area of Limestone.

Following grinding, the Limestone will be flush with the grout lines. Maintaining a ground and polished Limestone floor is similar to cleaning an individual bit of glass. There will be no grout lines to capture soil. Hole cracks and chip repairs tend to be an element of the Limestone restoration work. After we have assessed the Limestone floor, we will advise the best Limestone restoration process.

Learn moreabout our Limestone cleaning Newbattle service and our wide-ranging stone floor cleaning restoration services or Book your free Quote

Slate floors look great using their textured surface and vibrant colour. Our company is commonly called to clean slate when it suffers form layers of old sealer with ingrained dirt, so that the surface looks worn and dirty.

We use a combination of machine scrubbing and hand scrubbing to remove all traces of old dirty sealers and clean the tiles. After the professional cleaning is finished, use industrial-grade sealers that will last for a long time not just months.

If you want a smooth finish, we are able to grind the floor, but we must measure the slate before grinding.

Learn more about our Slate cleaning and sealing Newbattle service and also our entire stone cleaning  options or Book a Quote

Many Victorian and Edwardian hallways will have floors made from Geometric Encaustic tiles.

The primary characteristics of Victorian tiles are the natural clay colours and a matt finish.

Along with the variations in interior design, these kinds of floors come with carpet underlay, lino, bitumen and additional glue deposits.

With their age, these types of floors might have a number of coating residues, that need to have expert cleaning

A colour intensifying sealer is put on after cleaning, to bring back the first colours when you look at the tiles. If you prefer a sheen or gloss finish a topical sealer or wax could be used.

Read moreabout our Victorian Minton Tiles cleaning and sealing Newbattle service along with our extensive professional cleaningsystems or Book a Quote

Porcelain is classified as a ceramic, but made with alternative ingredients than standard ceramic tiles.

Porcelain is very moisture-resistant, therefore spillages should not pnetrate into the tile and cause stains.

If Porcelain is not made properly, the top can be absorbent just like natural stone floors. This soil can be tough to remove.

We possess the experience and equipment to get rid of this difficult to reach soil.

Once your porcelain floor has been cleaned we can to protect against day to day spillages.

If you have got a solid colour Porcelain, we could re-surface the tiles by Grinding and re-polishing.

Read more about our Porcelain Tiles Cleaning Newbattle floor restoration service including our substantial professional cleaning services or Book a Quote.

Natural stone floor cleaning typically requires additional restoration services. Restoring stone and tile always involves a number of steps. Natural stone floors suffer from traffic wear and damage, because individuals stroll over them. In many cases, dirt, spillages and traffic scratches spoil floor's finish, hence the significance of stone restoration. Polished floors like terrazzo, Stone and granite show wear a lot quicker while the polished finish goes dull from traffic marks. A surface sealer does not prevent porous stone and tiles like Limestone, Sandstone and Terracotta gradually suffering from wear and spill problems.

Grout is usually the most sensitive section of a stone or tile installation. Grout is usually a little recessed, that means the grout traps more soil compared to the stone and tile itself. Natural stone restoration more often than not requires some crack and hole repairs.

Resurfacing removes surface damage from etching and surface scratching.Natural stone has got the appeal that a grubby, porous surface can be removed, revealing a beautiful new surface.