Stone Tile Cleaning & Restoration Almondbank

In the long run, Limestone will become matt and loose its shine. Scratches and etch marks build and take off the initial surface. Sooner or later, your Limestone floor will have to be repolished. We utilise industrial-grade equipment and diamond tooling to grind and polish the stone.

It's virtually unachievable to lay a Limestone tile floor absolutely flat. The only way to make a Limestone floor perfectly smooth is by grinding off the lippage and uneven edges of the tiles. Limestone floor grinding is a specialist process, that provides outstanding results. The Limestone will get a monolithic appearance as just one piece of Limestone.

After grinding, the Limestone tiles will sit at the same level the grout lines. A smooth Limestone finish is much simpler clean. Also, soil does not get stuck into the grout lines. Cracks and chips can be repaired with colour matched resin fillers. The particular restoration needed should be decided by the current state of the Limestone floor.

Learn moreabout our Limestone cleaning Almondbank services plus our comprehensive stone floor cleaning restoration systems or Book your free Quote

Slate floors look great along with their textured appearance and vibrant colour. We have been commonly called to restore slate when it suffers form layers of old sealer with ingrained dirt, and so the surface appears worn and dirty.

We use a combination of machine scrubbing and hand scrubbing to remove all traces of previous dirty sealers and clean the floor. After the professional cleaning is completed , the floor is left to dry, then put on a long-lasting, easy to clean sealer.

If you want a smooth floor, we could grind a floor, subject to your slate being ideal for grinding.

Find out about our Slate cleaning and sealing Almondbank services and also our extensive stone cleaning  solutions or Book a Quote

Victorian Clay Tiles are installed in a lot of Victorian and Edwardian hallways.

The tiles have a matt finish and acquire their colour from the clay used in their manufacture.

A lot of these floors were initially sealed and then covered up with carpet and lino.

The main challenges with victorian floor tiles is to remove the of oils, polishes, dirt, waxes and grime without doing damage to the floor.

After cleaning, a colour intensifying sealer is put on to regenerate the natural colours in the tiles. A topical sealer or wax finish will provide the tiles with a high-sheen finish.

Get more informationabout our Victorian Minton Tiles cleaning and sealing Almondbank services and also our substantial professional cleaningsolutions or Book a Quote

Porcelain is a form of ceramic tile.

The added minerals helps make Porcelain much stronger than standard ceramic tiles.

When the blend of ingredients is not correct, the top of tiles can be porous. just like natural stone floors. The tiny surface pits insure that it is hard to remove this soil.

You need professional machines and cleaning solutions to get rid of this soil.

Once your porcelain floor has been cleaned we are able to use a sealer to protect against regular soil and spills.

If the porcelain is a through-colour, we can resurface the porcelain, the same as granite or Stone restoration.

Get more information about our Porcelain Tiles Cleaning Almondbank floor restoration service as well as our extensive professional cleaning services or Book a Quote.

Natural tone cleaning is hardly ever just cleaning, there is certainly regularly more restoration required. Restoring stone and tile customarily involves several steps. natural stone and tile floors have problems with foot traffic wear and damage, because individuals move over them. In many cases, soil, spots and traffic scratches harm floor's finish, consequently the need to have stone restoration. Highly polished Stone and granite floors exhibit wear and tear rapidly, as little traffic scratches in the surface dull the luster and hold dirt. Foot traffic problems sooner or later has an effect on porous natural stone such as Limestone, Travertine, Terracotta and Sandstone, which are usually coated with a film-forming surface sealer.

Most stone and tile floors have grout. Soiled grout is a common problem to be fixed on natural stone and tile floors. Holes could be filled and cracks repaired as part of the restoration.

Etching and scratches are generally taken away by resurfacing. Natural stone can be ground to reveal a new stone surface.