Stone Tile Cleaning & Restoration Blairgowrie

Bit by bit Limestone tiles will loose the initial shine. Scratching and etch marks strengthen and take off the original polish. Limestone Polishing is your only way to revive the original polish. We use diamond polishing equipment to bring back the original luster.

The majority of Limestone surfaces are uneven due to the fact tiles are not installed flat. The only method to make a Limestone tile floor flat is by grinding off the lippage and uneven tile edges. Grinding Limestone floors should be completed by restoration professionals. The Limestone floor will get a monolithic appearance as just one slab of Limestone.

Following grinding, the Limestone tiles be flush with the grout lines. Cleaning a ground, honed and polished Limestone floor is a lot like cleaning just one bit of glass. Also, soil doesn't get stuck into the grout lines. Cracks and chips can be repaired with coloured resin repair fillers. After we have assessed the Limestone floor, we will advise the very best Limestone restoration process.

Find out moreabout our Limestone cleaning Blairgowrie work as well as our entire stone floor cleaning restoration service or Book your free Quote

Slate flooring is among the most popular kinds of natural stone, because it needs less routine maintenance and mopping. Cleft slate will get a build-up of dirt and sealer residues inside the crevices that is difficult to remove.

We use rotary cleaning devices and sealer removers clean the slate. When our professional cleaning is completed,finally, we apply a long-lasting sealer that also makes a floor much easier to maintain.

If you prefer a smooth floor, we can grind a floor, subject towards the slate being suited to grinding.

Learn more about our Slate cleaning and sealing Blairgowrie service including our entire stone cleaning  options or Book a Quote

Period Geometric or Encaustic floor tiles are found in Victorian and Edwardian hallways.

The tiles are unglazed utilizing the the natural colours from the clay used in their manufacture.

Owing to how old they are, these floors have had a lot of wear and can have layers of different sealers.

The primary challenges with victorian floor tiles is removing decades of polished, oils, dirt, waxes and grime without damaging the floor tiles.

After cleaning an impregnating sealer is used to enhance the colours and protect the tiles. Topical sealers and waxes will give a floor a sheen or glossy finish.

Find outabout our Victorian Minton Tiles cleaning and sealing Blairgowrie service in addition to our wide-ranging professional cleaningservice or Book a Quote

Porcelain is categorised as a ceramic, but manufactured with alternative materials than traditional glazes and clay tiles.

This helps make Porcelain much more stain resistant and simpler to maintain than standard ceramic tiles.

Inferior porcelain has microscopic holes that will absorb soil just like natural stone floors. The minute surface pits make it hard to remove this soil.

We are able to get rid of ingrained soil using equipment built to go into the microscopic pits holding the soil.

We will help stop the dirt with Porcelain sealers.

Solid color Porcelain may be ground and restored just like Granite or Stone.

Get more information about our Porcelain Tiles Cleaning Blairgowrie floor restoration services in addition to our comprehensive professional cleaning treatments or Book a Quote.

Natural stone cleaning very often will require further restoration services. Each kind of natural stone features its own characteristics and restoration challenges. Natural stone floors suffer from traffic wear and damage, because individuals walk over them. In many cases, dirt, stains and traffic scrapes ruin the floor finish, subsequently the significance of stone restoration. Polished floors like granite, Stone and terrazzo reveal wear a lot faster while the shiny finish gets dull from traffic scratches. A surface sealer will not prevent permeable tiles like Sandstone, Limestone and Terracotta gradually struggling with wear and spill problems.

Grout is usually the most sensitive section of a stone floor installation. As it is a little bit deep-set, which means that the grout captures more dirt than the stone and tile itself. Cracks, chips and hole repairs are often part of the restoration process.

We use resurfacing to get rid of stone finish damage as a result of acid etching and scratches.We are able to remove the old finish from the natural stone, showing a new sparkling finish.