Stone Tile Cleaning & Restoration Bowling

Over time, Limestone will end up dull and loose its appearance. The damage to the surface is due to traffic scratching and etch marks The best way to revive the initial shine is through polishing the tiles. We use diamond polishing to re-surface a floor and rejuvenate the appearance.

If your floor happens to be put down leaving jagged tiles, this might be known as “lippage”. We can grind away the jagged edges of the tiles, making the tile surface level. This really is a complicated process but the the finished results are amazing. The Limestone will get a monolithic appearance as an individual area of Limestone.

Following grinding, the tiles and grout will be at the exact same level. It is a lot easier to mop a smooth, sleek Limestone than an irregular floor. Also, soil doesn't get stuck into the grout lines. If your Limestone has cracks and chips, we could repair them using resin fillers, closely colour matched with the Limestone. Once we have assessed your floor, we will advice on the best Limestone restoration process.

Find out moreabout our Limestone cleaning Bowling service as well as our comprehensive stone floor cleaning restoration treatments or Book your free Quote

Slate floors look great along with their textured appearance and vibrant colours. We have been mostly called to restore slate when it has layers of old coating with ingrained soil, and so the appearance appears dull and soiled.

We use professional sealer removal treatments and scrubbing appliances to remove the layers of old coatings. When our professional cleaning is complete, then use professional sealers that will last for decades not just months.

If you like a smooth floor, we could grind a floor, subject to the slate being suited to grinding.

Get more information about our Slate cleaning and sealing Bowling service plus our wide-ranging stone cleaning  service or Book a Quote

Victorian Clay Tiles are installed in many Victorian and Edwardian hallways.

The tiles are unglazed utilizing the the natural colours of the clay used to make them.

Due to their age, these floors have experienced plenty of wear and often have layers of various sealers.

Owing to their age, these kinds of floors might have a range of coating residues, that really need specialist cleaning

A colour intensifying sealer is used immediately after cleaning, to revive the original colours in the tiles. A topical sealer or wax finish will provide the floor with a high-sheen finish.

Get more informationabout our Victorian Minton Tiles cleaning and sealing Bowling service including our extensive professional cleaningsolutions or Book a Quote

Porcelain is actually a ceramic blend with additional sand and feldspar added to produce a denser tile.

The added minerals makes Porcelain much stronger than standard ceramic tiles.

Some inferior porcelain has tiny holes which will absorb soil just like natural stone floors. It may be hard to remove this soil.

We possess the equipment and experience to eliminate this hard to reach soil.

Once your porcelain floor is clean we are able to apply a sealer which protects against regular soil and spills.

Solid color Porcelain could be ground and restored just like Granite or Stone.

Read more about our Porcelain Tiles Cleaning Bowling floor restoration work as well as our substantial professional cleaning systems or Book a Quote.

There tend to be aspects of natural stone restoration when undertaking natural stone cleaning. Restoring stone and tile floors frequently involves many steps. Natural stone floors have problems with traffic wear and damage, because individuals stroll over them. Foot traffic deterioration, spills and surface problems will happen on most stone floors, wrecking the surface, making the stone look worn and unattractive, hence the need for stone restoration. Polished floors like Stone, Granite and Terrazzo show wear much faster once the lustre gets dull from traffic scratching. Wear damage eventually affects porous natural stone including Sandstone, Terracotta, Travertine &, Limestone, which are most often coated with a film-forming surface sealer.

Most stone flooring have grout lines. As it is a little concave, hence the grout draws in more dirt compared to the stone and tile itself. Cracks, chips and hole repairs are frequently part of the restoration work.

Acid etching and scratches may be taken away by resurfacing.We can get rid of the old finish from the natural stone, revealing a brand new clean finish.