Stone Tile Cleaning & Restoration Quarter

The initial surface on Limestone tiles will bit by bit dull. The damage to the surface is due to traffic scratching and etch marks Before long, the Limestone will have to be repolished. We use diamonds to take away the damage and repair the gloss.

It is pretty much unachievable to lay a Limestone tile floor really flat. A Limestone floor is smoothed by grinding off the lippage and irregular edges of the tiles. You require dedicated apparatus and several years of Limestone grinding and polishing to successfully grind a Limestone floor, nevertheless the final results are dazzling. The Limestone will have a monolithic appearance as a single area of stone.

Following grinding, the grout sits is level with the Limestone tiles. Mopping a ground, honed and polished Limestone floor is similar to cleaning just one slab of glass. A smooth Limestone floor doesn't have grout depessions to capture dirt. If your Limestone has cracks and chips, we are able to repair them with resin fillers, colour matched to the Limestone. After checking out the Limestone, we will advise the best Limestone restoration service.

Find outabout our Limestone cleaning Quarter work including our wide-ranging stone floor cleaning restoration solutions or Book your free Quote

Slate is a tremendously popular floor and wall tile due to its low porosity and the many varieties and textures of Slate available. Slate needs regular sealing to stop spills and soil marking the finish.

We use professional sealer removers and scrubbing machines to remove the layers of old coatings. Then we put on hard-wearing sealers.

If you want a smooth floor, we can grind a floor, subject towards the slate being suitable for grinding.

Get more information about our Slate cleaning and sealing Quarter services in addition to our substantial stone cleaning  work or Book a Quote

Many Victorian and Edwardian hallways may have floors produced from Geometric Encaustic tiles.

Victorian tiles are manufactured from natural clay with a natural matt finish.

A good number of these floors were initially sealed and then covered with carpet and lino.

The primary challenges with victorian floor tiles is removing the of oils, polishes, dirt, waxes and grime without causing harm to the tiles.

After cleaning, the original colours in the floor tiles can appear dull, therefore we use a colour intensifying impregnating sealer to revive the original . The mat finish may be polished by applying a wax or topical sealer.

Learn moreabout our Victorian Minton Tiles cleaning and sealing Quarter services plus our entire professional cleaningwork or Book a Quote

Porcelain is classified as a ceramic, but made with different ingredients to traditional glazes and clay tiles.

This helps make Porcelain a lot more stain resistant and simpler to keep up than traditional ceramic tiles.

Some inferior porcelain has microscopic holes which will absorb soil just like natural stone floors. If you have a substandard Porcelain, the surface soil can be difficult to remove.

You need specialist equipment and cleaners to remove this soil.

Our Porcelain sealers can help stop further soil problems.

If you've got a trough-colour Porcelain, we are able to re-surface the tiles by Grinding and re-polishing.

Read more about our Porcelain Tiles Cleaning Quarter floor restoration work as well as our extensive professional cleaning services or Book a Quote.

There tend to be elements of natural stone restoration during natural stone tile cleaning. Natural stone floor restoration may take many techniques. Stone and tile floors suffer with foot traffic wear and damage, because people walk on them. In many cases, soil, spillages and foot traffic scuff marks spoil floor's finish, hence the need for stone restoration. Highly polished floors like granite, Stone and terrazzo reveal wear a lot quicker while the polish gets dull from traffic scratches. Traffic problems gradually affects porous natural stone which include Sandstone, Limestone, Terracotta & Travertine, which are usually protected with a film-forming surface sealer.

Most stone and tile floors have cement grout lines. Grout is usually a little bit recessed, therefore the grout captures more dirt than the stone itself. Natural stone restoration usually requires some crack and hole repair.

We use grinding and honing to remove stone finish damage brought on by acid etching and scratches.Natural stone has the appeal that a dirty, porous finish can be taken away, exposing a lovely new surface.