Stone Floor Cleaning Monmouthshire

The initial shine on Limestone will bit by bit loose its gloss. The dullness is caused by microscopic marks on the surface where it's been walked over. Limestone Polishing is your only way to revive the shine. We use industrial diamonds to remove the damage and recover the original surface.

Almost all Limestone tile floors are not even as the Limestone tiles are not laid level. The only method to make a Limestone floor perfectly smooth is by grinding away the lippage and jagged tile edges. Limestone grinding is a specialist job, that provides superb results. The Limestone floor looks "monolithic", appearing to be manufactured from just one slab of Limestone.

Following grinding, the grout sits is level with the Limestone tiles. After grinding mopping is a breeze, as the mop slides on the floor. There will be no uneven grout lines to hold soil. If your Limestone floor has chips or cracks, we could repair them using resin fillers, closely colour matched to the Limestone. The particular restoration needed will be decided by the current state of the floor.

Read moreabout our Limestone cleaning Monmouth service as well as our entire stone floor cleaning restoration service or Book your free Quote->>

You will find granite in many homes and commercial buildings. Granite is incredibly hard wearing.Granite is frequently chosen for the stone's hard-wearing characteristics. A finish on Granite lasts longer than other natural stones.

Very few stone restoration companies restore Granite, since it is so very hard and tough to restore. We offer a complete range of granite restoration, cleaning polishing and sealing services. to the highest standard.

Find outabout our Granite polishing Chepstow service and also our comprehensive stone floor cleaning restoration services or Book a Quote

Slate is a really popular floor and wall tile due to its low porosity and the many varieties and textures of Slate available. Even though slate has a minimal porosity, it's going to always partly absorb and oil based spills, leaving annoying spots.

We use industrial-grade sealer removal treatments and scrubbing devices to eliminate the layers of old sealer. Once the professional cleaning is completed, use specialist sealers that will last for a long time not months.

If you like a smooth finish, we are able to grind the floor, but we must measure the slate before grinding.

Find out about our Slate cleaning and sealing Chepstow services plus our wide-ranging stone cleaning  solutions or Book a Quote

Many Victorian and Edwardian hallways may have floors created from Geometric Encaustic tiles.

The tiles are unglazed with the the natural colours of the clay used to make them.

A lot of these floors were initially sealed and then covered with carpet or lino.

Owing to their age, these floors might have a range of coating residues, that have to have professional cleaning

A colour intensifying sealer is put on following cleaning, to replace the first colours within the tiles. Topical sealers and waxes will give a floor a sheen or glossy finish.

Find out moreabout our Victorian Minton Tiles cleaning and sealing Rogiet services including our wide-ranging professional cleaningoptions or Book a Quote

Porcelain is becoming an extremely desirable option to traditional ceramic tiles and natural stone.

Porcelain is extremely resistant to moisture, hence spills cannot pnetrate into the tile and cause stains.

When the blend of ceramics isn't correct, the top of tiles may be porous. just like natural stone floors. It could be hard to remove this soil.

We are able to get rid of embedded dirt with equipment built to go into the microscopic pits holding the soil.

After cleaning, we apply specialist Porcelain sealers to prevent this problem.

If you've got a solid colour Porcelain, we can re-surface the tiles by Grinding and re-polishing.

Discover more about our Porcelain Tiles Cleaning Usk floor restoration service including our wide-ranging professional cleaning treatments or Book a Quote.

Natural tone floor tile cleaning is seldom cleaning alone, there is certainly commonly additional restoration needed. Natural stone floor restoration addresses a variety of services. All stone and tile floors suffer with surface damage and general wear challenges. The most typical problem we see during stone restoration is greasy soil scuffed into the floor establishing a lifeless, unattractive coating. A polished stone floor wears more quickly as traffic abrasion that will quickly damage he polish and dull the gloss. A surface sealer will not stop porous stone and tiles like Sandstone, Limestone & Terracotta eventually suffering from wear and spill damage.

Grout is usually the most sensitive element of a natural stone installation. Dirty grout is a very common problem to be fixed on natural stone and tile floors. Holes could be filled and cracks repaired as an element of a restoration.

Acid etching and scratches are usually taken out by grinding and honing.We can remove the existing surface from the stone, exposing a brand new clean finish.